Saturday, August 18, 2012

Starbuckcylon Resin Helmet!!!

It's here!!! A few notes I didn't mention in the vid... The weight is MUCH lighter than the fiberglass version. VERY good. There is a tiny bit of issue with the face lining up. I was able to almost fix this with a bit of creative filing so it may not be noticeable in the video. It's really subtle but the face is being recast and future versions will have this corrected. Also, there are other resin parts, eyes, and I believe the head antenna still in the works. The eyes and antenna in the video are my 3d printed versions. IMG_2750 IMG_2749 IMG_2748 IMG_2744 IMG_2752 IMG_2742 IMG_2738 IMG_2725


Here's what I used for the neck bolts.
IMG_2758 IMG_2759 IMG_2761



Cut the head off of the screw...
IMG_2764

Screw on the threaded wall anchor...
IMG_2765

Snip off the pointy bits...
IMG_2766


Fiberglass eye spacers
IMG_2674

1 comment:

  1. Can't wait for this helmet to be available! Looks great!

    ReplyDelete